I suggest you label the cables with colored tape and take pictures of the connections in case you are not sure you can figure out how to reconnect everything.

We brought her a 50 inch smart tv Samsung or Sony at Best Buy and set it up when we visited her 2 years ago and it died. She first called the cable company who came and said it was the tv not cable. This is total bs. But call Sony and see if you can get it repaired In home.

Personally, I would just buy a new tv, and have the delivery people put the old one in storage.

And if you lived in a senior home you’d be on your own. I move people into senior living places and they’ll help with the initial hookup but after that you’d have to arrange for the repair on your own or you’d have to have get a new tv.

I’m hesitant to buy from Best Buy again.


Good luck

If you are plugged into a power strip, turn it off for 15 seconds or so. Then turn back on. This is known as a 'hard reset' when power is shut off to your TV and peripherals. The blinking light could be a trouble signal that will clear when you do this. My Visio has experienced this condition a few times and this seems to clear the problem.

but then Comcast sent a signal and it appeared the cable box was OK - solid light instead of a flashing one. We even tried to switch connection in the power strip, in case the one for the TV was dead. Was not.

Spouse was really unhappy about the whole thing. Really did not make sense that all of a sudden the TV lost power. And the alternative, of having a Geek Squad rep in the house when we are isolating, was bad enough.

Decided to play with an extension cord just for the TV. There are currently six devices plugged into the power strip.

Took me awhile to figure out which one was the TV and... all of a sudden it came on. Yes, even after plugging it back to the power strip.

Just glad that it is OK now.

When you turn the TV off with the remote, it cuts the power to the screen. The TV is still "on" as far as the TV electronics are concerned. When you pull the plug from the outlet or power strip, this shuts the the TV down completely. When you plug it back in and turn the TV on, it has to recycle through the whole software start-up sequence. When you have a bunch of things plugged into the same outlet, there can be some spikes of energy that get sent to the TV causing the CPU to freeze up and act like it's broken.

I usually can reset it by unplugging the power for 30 seconds and plugging it back in.

I have found other problems solved by googling the issue.

also sometimes instead of using the remote to turn the TV on or off to solve a problem I have to use the on/off button on the side of my TV.